Vision TC3 USBB Plus Active Booster Over USB
Vision TC3 USBb Plus (Active USB Booster) Techconnect clip in Active USB 2 Booster Module Extends USB signals over USB 2 cable (No transmitter required) just connect you computer or USB device to the front of the module using a standard USB 2 Cable and connect a Vision USB2 3m, or 5m USB cables from the rear of the module direct to the device.
Maximum input cable length: 10m
An Active USB booster module circuit has been cleverly built onto the rear of the rear of the TC3-USBB Plus Active Booster module and it uses the 5v power lines provided by standard USB to boost the signal from the wall plate to the remote device.
To achieve reliability when using long cable distance make sure the Laptop is connected to mains power, due to variations in output from certain computers and laptops and to achieve a greater distance than 10m the booster module might also require the assistance of an additional power source, this can be achieved by either piggyback power from a TC3-AMP or by using an additional power supply unit (TC2 P12V0.5A) 2940992 which will plug directly into the rear of the module.
Vision TC3-USBB Plus Active snap in Module has 1 x Standard "B" type USB socket on the front of the module and a standard USB "A" socket on the rear.
(Cables Not Included)
Compatibility: USB V2/3 - Windows XP / Vista / Windows 7 Home, Windows 7 Premium.
Product: Vision Techconnect
Part Code: 3446582
Manufacturer Code: TC3-USBB+
STD Code: Techconnect TC3 USBB+