Vision SB-800P TV SoundBar 3872395

Vision SB-800P TV SoundBar 3872395
Vision SB-800P TV SoundBar 3872395Vision SB-800P TV SoundBar 3872395Vision SB-800P TV SoundBar 3872395Vision SB-800P TV SoundBar 3872395

Vision SB-800P 3872395

Our Price:  £69.04(£82.85 Inc. VAT)

Order Code:  3872395
Part Number:  SB-800P
Manufacturer:  VISION



No stock


Vision Audio Visual : Installation : Innovation

VISION SB 800P TV Sound Bar -  30W RMS

VISION SB-800P TV Sound Bar has been designed to enhance any interactive flat-panel display or TV's sound and the Vision SB800P sound bar can also be fitted discretely and securely to a wall or under the TV / flat-panel with the included wall and TV brackets the SB800P is not only simple to install but sound great too!

Mobile Audio
If users need to be able to move their interactive flat panel screen between rooms the VISION SB-800P soundbar is the perfect choice. The soundbar SB-800P can be sat on a shelf, fixed direct to the wall under the flat panel or you can attach it direct to the screen using the included brackets which utilise the same fixing points the screen wall mount bracket.  

Two 3.5″ woofers are complemented by two tweeters. The VISION SB-800P has an integrated crossover circuit that splits the frequency spectrum across four drivers to maximize efficiency.

Volume Control
The volume dial on the VISION SB-800P is positioned underneath the loudspeaker. Turning anti-clockwise turns power off. Note: no remote control is included.

Wall Bracket
If the flat-panel is wall mounted then a wall bracket is included which fixes the VISION SB-800P soundbar close to the wall.

Hanging Brackets
A set of 700 mm (27.6″) brackets is also included which can be used to hang the VISION SB-800P soundbar under the flat panel.

Speaker-Level Input
As well as being able to connect any line-level device to the Vision SB-800P – like your phone – you can also opt to bypass the internal amplifier and use the soundbar as passive speakers. Some flat panels have an amplifier inside, so this approach allows you to use your existing TV or flat-panels remote to adjust volume.

ABS Chassis
Heavy-weight plastic material is used for the chassis, allowing a beautiful curved chassis and a rigid acoustic chamber for low-distortion sound.

Two Summed Line-level Inputs
The rear input panel of the VISION SB-800P offers 3.5mm stereo mini-jack plus 2-phono (RCA) line-level inputs which are combined at the input stage meaning there is no input selection switch. When both inputs are used it is especially important that all source and display devices in the system are powered from the same mains power source, otherwise earth hums will occur.


2 x Wall brackets
2 x 700mm mounting strips – to hang soundbar beneath flat panel.
Note: no input cables are included

POWER SUPPLY: 100-240v 50/60Hz AC External Power Supply – 18 volt / 1 amp
Transformer integrated into plug. Includes interchangeable plugs: UK/EU/US/AU. DC tail length: 4m.
Transformer dimensions: 75 x 38 x 50mm / 3″ x 1.5″ x 2″ (tall x wide x deep) including prongs



PRODUCT DIMENSIONS: 756 x 75 x 99mm / 29.8″ x 2.9″ x 3.9″ (width x depth x height)

PACKAGED DIMENSIONS: 870 x 92 x 135 mm / 34″ x 3.6 ″ x 5.3″

PRODUCT WEIGHT: 2 kg / 4.4 lb

PACKAGED WEIGHT: 2.7 kg /5.9 lb



Amplifier Output: 2 x 15w watts (RMS)
Woofer: 2 x 3.5″
Tweeter: 2 x 0.5″
Input 1: Minijack (3.5mm)
Input 2: 2-Phono (RCA) (inputs are summed)
Speaker Input (from flat panel if it has internal amplifier): Removable Phoenix type
Output Impedance: 8 ohms
Sensitivity: 88dB (1w/1m)
Frequency response: 120Hz-20kHz

vision sp-2000p manual Vision SP-800P Bracket CAD

Customers who bought this item also bought:


Vision Techconnect Wall Plates - Vision Amplifiers - Vision Techconnect Face Plates - Techconnect HDMI Wall Plate Socket - VGA Module
Techconnect Cables - Sky HD Wall plates - Vision Techconnect Wall Amplifier - Techconnect Control - Techconnect Tilt - Vision Wall Speakers