Vision CS-1800 Low Profile Ceiling Speakers 3715629
Vision CS-1800 Low Profile, flush mount ceiling tile speakers with dual coil speakers are discrete 8-ohm ceiling speakers with Powerful and robust 30W power handling from the vision cs-1800 translates into loud sound with no distortion and with a frequency response of 50Hz -20kHz response the 2-way design offers full-bandwidth delivery with control and clarity.
Crossover design on the vision cs-1800 ceiling speakers provides superb off-axis dispersion characteristics. Ceiling speakers inherently lack power at the bottom end, so Vision cs-1800 have been tuned to have a slightly louder sensitivity of 89dB to punch through high-noise environments. The 6.5 WOOFER, (Main speaker unit) of the cs-1800 is a polypropylene cone with a 0.5" silk tweeter.
The Vision CS 1800 ceiling speaker is designed for unobtrusive sound dispersion whilst mounted flush into false ceilings and ceiling tiles or deep custom made plaster board cavity walls, a perfect alternative for situations where wall speakers are not appropriate.
Simple to install, a cardboard template is provided with the Vision CS-1800 ceiling Speakers so that you can cut out the hole by hand using a pad saw or just purchase a 198mm (7.8") hole-saw with an arbor (Not Included) from your local hardware supplier to drill the required hole size into the surface where the speaker will be mounted, you can then connect your speaker wires directly into the spring loaded terminals and fit the speaker in place! Its clean and easy, job done.
Only 3.2″ (82 mm) deep, no compromise needs to be made when positioning the CS-1800 in the ceiling. They can be placed optimally around the room and they fit in a wide variety of false-ceiling environments.
Once the speaker has been mounted in place the Grill clips securely into place using magnets
LOUDSPEAKER DIMENSIONS: 232 x 92 mm/ 9.1″ x 3.6″ (diameter 224 mm without grille)
CUTOUT SIZE: 198 mm / 7.8″
SPEAKER WEIGHT: 1.1 kg / 2.4 lbs (each)
POWER HANDLING: 35 Watt RMS
WOOFER: 6.5″ Polypropylene
TWEETER: 0.5″ Silk
SPEAKER TERMINALS: Binding post
NOMINAL IMPEDANCE: 8 ohms