Vision AV-1900 - 100W RMS - Stereo Bluetooth Amplifier
NEW For 2021 Replaces AV-1800
2 x 50w RMS (at 8 ohms) low impedance digital power amplifier
Input 1: Line-level Stereo (2-Phono/RCA) or Mic (XLR)
Input 2: Line-level Stereo (2-Phono/RCA) or Mic (Phoenix)
Input 3: Bluetooth or Mic (Phoenix)
Input 4: Line-level Stereo (Minijack) or Mic (Phoenix)
1 x Line-level Pre-Output
Balanced Mic inputs with Phantom Power
AV 1900 amplifier is compact, and has a simple interface with just two dials which are turned to adjust and pushed to switch or use the included amplifier remote. Vision Amplifiers are an ideal solution for meeting rooms, Classrooms, small auditoriums, school halls, and small churches.
This Vision amplifier is rated at 2 x 50w RMS per channel at 8 ohms impedance (100W RMS Total). The Vision Stereo AV 1900 power amplifier has Integrated Bluetooth Connectivity and 4 x Stereo inputs / 1 x Stereo Pre-Output / 1 x Balanced Mic input with Phantom Power.
The clear simple interface enables the user to control the Amplifier with just two dials or use the included IR Remote.
The IR remote control gives the user bass and treble adjustment and direct input selection. The AV 1900 can be controlled by a control device such as Techconnect Control via IR or RS-232.
Easily connect to your Laptop, Tablet or phone using the Integrated Bluetooth connection option. The AV 1900 amplifier can automatically switch to the Bluetooth source when it is paired. Bluetooth can be renamed and the pin changed by connecting to a PC (see software link below).
Flexible Inputs and Output: The Vision AV 1900 has Bluetooth Connectivity plus 4 stereo inputs (via Phono (RCA) connectors) that can accept input from a variety of sources including computer laptops and DVD players and the Vision AV 1900 amplifier features an line-level pre-output, which feeds the input to a subwoofer for bass reinforcement, or a tape recorder recording, or even to another AV 1900 or larger amplifier for more power and Inputs! Comes with input and output cables so its is ready for use out of the box.
Microphone Input: The microphone input on the Vision AV 1900 uses a professional Balanced XLR connector, to eliminate the electromagnetic noise induced on long cable runs and comes with "Phantom Power" ie the required voltage for the microphones used on desk and conference and other sensitive condenser microphones.
Optional mounting hardware is included to allow cable-tying either to a projector ceiling pole, or into a rack.
Connect up to 4 Vision Speakers:
Standard: 1 x 8 Ohms Speaker per Channel
4 Speaker Setup: 2 x 8 Ohms Speakers per channel wired in Parallel = 4 ohms