Vision SP-800P Multimedia Speaker System
Visions SP-800P Multimedia speaker have a built-in Stereo amplifier outputting 2 x 12w (RMS) and can be wall mounted or used as shelf speakers, ideal for use with computers and TV's etc in small training rooms, offices and classrooms where a simple audio reinforcement system will suffice they are simple to install and sound great!
The Vision SP-800P speakers provide incredible sound reproduction by using A 4″ woofer that is complemented by a 1" tweeter and 2" squawker. Splitting the frequency spectrum across three drivers reduces distortion.
The volume dial is positioned on the rear of the ‘master’ loudspeaker, Turning anti-clockwise also turns the power On / Off.
Horizontal C bracket
The adjustable brackets allow the installer to easily angle up 30º or down 30º. Or leave the brackets off and use as shelf speakers.
At the rear of the SP-800P master loudspeaker there is a 3.5mm stereo minijack socket and 2-phono (RCA) inputs.
Heavy-weight plastic material is used for the chassis, allowing a beautiful curved chassis and a rigid acoustic chamber for distortion-free sound.
A bass reflex port allows greater excursion of the woofer, allowing the woofer to produce lower frequencies, and the phase-delayed movement of air from behind the woofer to the front reinforces the bass even more.
The two line-level inputs are combined at the input stage meaning there is no input selection switch. When both inputs are used it is especially important that all source and display devices in the system are powered from the same mains power source, otherwise earth hums will occur.
Dimensions 150 x 145 x 220 mm / 5.9″ x 5.71″ x 8.66″ (length x width x height for each speaker)
Replacement Power Supply Unit (PSU): TC2 P18V1A - 3675051