Vision’s Vision Flat-panel Mount VFM-W6X4T are designed by Vision’s engineering team for professional AV installers. This mount is no-compromise: very strong, fast to install, highly adjustable, everything included. The VFM-W6X4T fits any flat-panel LCD or LED screen which has rear mounting holes up to 600 wide x 400 mm tall apart.
Interactive flat panels are large and very heavy. Vision’s VFM-W6X4T uses heavy gauge sheet metal to take the weight up to SWL 100 kg / 220 lb safely.
Vision includes everything you need including a load of M5, 6, and 8 bolts in varying lengths to fix the vertical arms to the rear of the display.
For 37-70" Displays
VFM-W6X4T Fits most displays from 37-70″ subject to VESA pattern and weight limit. Note: curved screens are not supported by this mount.
Designed for Professionals
A proven design allows fast fixing to stud or masonry walls. Vertically slotted holes on the horizontal part allowing leveling adjustment after fixing, and side to side adjustment.
The display latches on the horizontal section of the VFM-W6X4V as the display is hung in place. Snap the plastic pull-rods off to length so they are hidden behind the display. Give the pull-rods a downward tug to unlatch the display.
Side by Side
Two horizontal sections can be fixed together side by side for dual-display video conference or huddle room applications. Or extend the horizontal to bridge wide load bearing points in a wall.
Ideal in applications where the display is mounted high, this mount features tilt to direct the display downward.
Meets ADA Regulations
The thin design holds the display just 30 mm / 1.2″ off the wall. This looks better, reduces snagging risk, and because the load is close to the wall the mount has a higher safe working load rating.
Hide Media Player
Thoughtfully placed VESA 100 x 100 mm holes on the horizontal part allow a thin media player to fix behind the display out of sight.
Optional Video Conference Shelf
An optional shelf fixes in the centre above or below the display. Any camera including the Logitech Rally can be fixed to the shelf. It is also designed to accommodate Yamaha’s YVC-1000, Barco’s Clickshare CSE-200 base station, or Logitech’s Meetup wall bracket can fix to the vertical part. With VESA 100 x 100 mm holes on the vertical section, product’s like Heckler’s Zoom Room iPad enclosure can be fixed. Part Number: VFM-WVC [EU SAP: 5048878 / US SAP: tbc]
Optional Laptop Shelf
An optional shelf fixes at four different heights in 80 mm (3.1″) increments to the horizontal part of the wall mount. The platform is 450 mm (17.7″) wide by 306 mm (12.0″) deep. At the lowest height setting the shelf is 680 mm (26.8″) below the centre of screen. Part Number: VFM-WLS [EU SAP: 4857149 / US SAP: 13557610] Due into stock late 2019