VISION TM-ST2 UST / ST Projector Wall Mount Bracket
Vision TM-ST2 Short Throw projector wall mount boom arm kit designed to fit 99% of all small to medium sized data projectors.
Vision Techmount TM-ST2 short throw projector boom arm wall mount can be quickly assembly with no extra parts required and has a Telescopic boom range of 930-1530mm (center of projector to wall) the Projector can be mounted at any point along the boom for easy setup an Adjustable boom incline has also been incorporated.
The Techmount TM-ST2 is a strong, flexible short throw projector boom arm which uses Vision’s universal spider fitting to attach projectors.
The boom is up to 1530mm – long enough for short throw projectors to project an image 2000mm wide. The spider can be mounted at any point along the boom.
TM-ST2 is Telescopic
The two-part boom allows easy adjustment of image size. Cables are dropped down the pole during assembly. The pole which fits to the wall bracket is 800mm long, and the outer pole is 900mm long.
TM-ST2 has Gradient Adjustment
A flexible wall plate allows the installer to alter the slope of the boom to offset the weight of heavy projectors.
. The TM-ST2 allows plenty of roll adjustment.
TM-ST2 has Fine Adjustment
The wall plate gives the installer some fine-tuning adjustment of the boom up and down and side to side.
TM-ST2 Security Bit
The TM-ST2 uses pin-hex security bolts which require a bespoke hex key. Vision includes a pin-hex drill bit to help assemble the product quickly using a power drill.
The modular design makes it simple to fit quickly. Just fix the wall mount in place, fit the boom, then attach the projector.
1 x H50 Pin-Hex key
1 x 17mm Spanner
4 x M2.5 43mm pan slot for Optoma & Acer
4 x M3 43mm screws
4 x M4 43mm screws
4 x M5 43mm screws
4 x M6 43mm screws
4 x M8 50mm Wall Fixtures
1 x Wall plate Cover
1 x Boom end cap
1 x Safety fall-arrest tether